Model: MSA2HD (Tool adaptor kit )

• Inspection/Dental mirror and tool adaptor kit
• ABS Holster for Dino-Lite Handheld Microscope
• Size: 1.5" (W) x 2.5" (H) x 2.5" (L)
• 4~8 mm Holster

Product Applications

MSA2-HD Inspection/Dental mirror and tool adaptor kit

The MSA2-HD adaptor is designed to securely hold and position an assortment of common hand-held dental/inspection mirrors and tools for use with Dino-Lite digital microscopes.

Included with each MSA2-HD mirror/tool kit:
- One specialized Dino-Lite scope holster.
- A selection of five swivel-type positioning adaptors designed to fit handle diameters of approx. 4mm,5mm,6mm,7mm and 8mm.
- One swivel ball threaded retaining collar.

Instructions for assembly and use:
1) Insert the mirror/tool handle through the bottom of the adaptor channel.
2) Select the appropriate swivel ball adaptor that corresponds to the diameter of the mirror/tool handle.
3) Place the appropriate sized swivel ball adaptor (slotted side UP) onto the end of the mirror/tool handle. Push/slide the ball adaptor down the handle approximately one inch.
4) Pull the Mirror/tool down until the attached ball swivel rests in the socket receptacle. Slide the threaded retaining collar over the end of the mirror/tool handle onto receptacle and loosely tighten.
5) Place the Dino-Lite digital microscope into the holster assembly.
6) Position the mirror/tool in front of and below Dino-Lite scope nozzle. Adjust length and alignment of mirror/tool and Securely tighten. Fine adjust positioning as necessary until satisfactory imaging is achieved.